OCEAN-35 cleaning agent can perfectly clean off all kinds of marine fouling such as sticky matter and ooze attached to the surface of the plate without disassembling the plate heat exchanger.
Fouling attached to the plate is generally formed on the seawater side of the central cooler or oil cooler in low temperature operation (temperature below 40-50 degrees).
At present, we generally think that the scale on the seawater side of the cooler is hard scale (calcium, magnesium compounds, etc.). So we often use acid washing, such as hydrochloric acid, although these are sludges containing various marine organisms rather than scales. In fact, when the working temperature of the heat exchanger is lower than 50 degrees, hard scale will not be formed. If cyclic pickling is used to clean the plate cold, it will not only have no cleaning effect, but also may cause plate corrosion due to poor neutralization.
OCEAN-35 degradable cycle cleaning method is a unique way to remove all kinds of marine organisms and sludge, it is also a cost-effective solution, shortens operation time, reduces maintenance work, and does not pollute environment.
OCEAN-35 is particularly effective in removing various marine microorganisms and marine sediments and sludge attached to various heat exchanger plates. Microscopically, the foam caused by Ocean-35 on the surface of the plate will form a cavitation phenomenon and produce impact force and an effect similar to ultrasonic waves. surface separated.
